AC 120V, 1980W, 2200VA, RS-232, USB, Lead-Acid, 2U, 38.45kg, Black
Description
Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
High frequency designReduces or eliminates bulky transformers resulting in lighter units for ease of handling.
Auto recognition of external batteriesUPS recognizes when external battery packs are attached and automatically adjusts runtime.
Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Energy meterProvides actual kilowatt hours of usage for energy conscious users.
Outlet group controlTurn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
Sequenced shutdown and restartConfigure select outlet groups to shut down and turn on in a pre-determined order (for UPSs with switched outlet groups).
Load sheddingTurn off select outlet groups in a pre-determined sequence to shed less critical equipment and conserve runtime (UPSs with switched outlet groups).
Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Multiple switched outlet groupsMultiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
Wide input voltage rangeDesigned for harsh electrical environments to save battery life.
StruxureWare Central compatibleEnables centralized management via StruxureWare Central.
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
High online efficiency Reduces utlility costs, generates less heat.
LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.
Overload protectionSafeguards unit from damage by automatically turning it off in the event of a short circuit or overload.
SmartSlotCustomize UPS capabilities with management cards.
Cold-start capableProvides temporary battery power when the utility power is out.
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
Disconnected battery notificationWarns when a battery is not available to provide backup power.
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.
Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarmsProvides notification of changing utility power and UPS conditions
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
USB connectivityProvides management of the UPS via a USB port (not available on all models).
Serial ConnectivityProvides management of the UPS via a serial port.
Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery.
Scalable runtimeAllows additional run time to be quickly added as needed.
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.
Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.
Network manageableProvides remote management of the UPS over the network.
Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.
Specifications
| Power |
|---|
| Output power |
1980 W |
| Input operation voltage (min) |
70 V |
| Input operation voltage (max) |
153 V |
| Output operation voltage (min) |
100 V |
| Output operation voltage (max) |
127 V |
| Surge energy rating |
540 J |
| Efficiency |
97.6% |
| Emergency Power Off (EPO) |
Yes |
| Output power capacity |
2.2 kVA |
| Input frequency |
50/60 Hz |
| Ports & interfaces |
|---|
| Cable length |
96.1" (2.44 m) |
| USB 2.0 ports quantity |
1 |
| Serial ports quantity |
1 |
| Ethernet LAN (RJ-45) ports |
1 |
| Performance |
|---|
| Response time |
2 ms |
| LED indicators |
Battery replacement |
| Surge protection |
Yes |
| Noise level |
55 dB |
| Features |
|---|
| Response time |
2 ms |
| Output power |
1980 W |
| Input operation voltage (min) |
70 V |
| Input operation voltage (max) |
153 V |
| Output operation voltage (min) |
100 V |
| Output operation voltage (max) |
127 V |
| Surge energy rating |
540 J |
| Efficiency |
97.6% |
| Surge protection |
Yes |
| Emergency Power Off (EPO) |
Yes |
| Noise level |
55 dB |
| Output power capacity |
2.2 kVA |
| Input frequency |
50/60 Hz |
| Battery |
|---|
| Battery technology |
Sealed Lead Acid (VRLA) |
| Battery recharge time |
3 h |
| Typical backup time at half load |
26 min |
| Typical backup time at full load |
7 min |
| Hot-swap battery |
Yes |
| Design |
|---|
| Rack capacity |
2U |
| Form factor |
Rackmount/Tower |
| LED indicators |
Battery replacement |
| Product colour |
Black |
| Certification |
NOM, TUV, UL, FCC |
| Cable length |
96.1" (2.44 m) |
| Display type |
LCD |
| Technical details |
|---|
| Harmonized System (HS) code |
85078000 |
| Compliance certificates |
RoHS |
| Packaging data |
|---|
| Package dimensions (WxDxH) |
23.5 x 34.2 x 9.57" (596 x 869 x 243 mm) |
| Package weight |
100.1 lbs (45.4 kg) |
| Certificates |
|---|
| Certification |
NOM, TUV, UL, FCC |
| Compliance certificates |
RoHS |
| Weight & dimensions |
|---|
| Weight |
84.9 lbs (38.5 kg) |
| Width |
17" (431 mm) |
| Package weight |
100.1 lbs (45.4 kg) |
| Height |
3.35" (85 mm) |
| Depth |
26.3" (667 mm) |
| Logistics data |
|---|
| Harmonized System (HS) code |
85078000 |
| Other features |
|---|
| Interface |
RJ45/USB |
| Input connection type |
NEMA L5-30P |
| Package dimensions (WxDxH) |
23.5 x 34.2 x 9.57" (596 x 869 x 243 mm) |
| Nominal output voltage |
120 V |
| Nominal input voltage |
120 V |
