/
Description
10/100BASE-TX / 100BASE-FX, SM, SC, RJ-45, 1310 nm, 30 km, 16 dBm
- The FlexPoint 10/100 is a 10BASE-T or 100BASE-TX to 100BASE-FX fiber media converter
- The UTP port supports auto or manual negotiation
- Extends network distances up to 120km
- Supports most network interfaces with a wide variety of cable and connector types
- Labeled status LEDs and switches for quick and easy installation
- Features a crossover switch for connection to hubs, switches or workstations
- Wall-mount or rack-mount on a 5-Module shelf or in a 14-Module power-redundant FlexPoint Powered Chassis
- Completely software independent with no installation of drivers required
- Standard (0 to +50oC), wide (-40° to +60oC) and extended (-40oC to +75oC) temperature ranges
- Peace-of-mind reliability backed by a lifetime warranty and free 24/7 technical support
The FlexPoint 10/100 is a modular 10BASE-T or 100BASE-TX UTP to 100BASE-FX fiber media converter that provides reliable and cost-effective network connectivity and fiber extension.
The FlexPoint 10/100 features a 10/100 auto-sensing UTP port that adjusts to the highest level of performance supported by the attached device. An override switch provides manual control over the 10/100 operation of the UTP port and the Half/Full- Duplex operation of both the fiber and UTP ports.
Using its store-and-forward technology with 1-Mbyte buffer memory, the FlexPoint 10/100 checks all packets and discards illegal or corrupted packets providing fragment-free packet forwarding.
It features a crossover switch that facilitates connectivity to network equipment such as hubs, switches and workstations.
The fiber port operates at 1310nm or 1550nm and features SC, ST, LC or MT-RJ connectors. Multimode fiber models support distances up to 5km, and single-mode fiber models support distances up to 120km.
Manual switch settings and LED indicators with on-the-label descriptions enable easy configuration to legacy devices or specific network requirements. The LEDs report the availability of power, port activity and link status, speed and duplex modes.
FlexPoint modules can be mounted utilizing optional wallmounting hardware or with DIN-rail mounting brackets. They can also be rack-mounted in a 5-Module shelf or in a high-density 14-Module, power-redundant Powered Chassis.
FlexPoint modules installed in the 5-Module shelf or used as standalone devices can be powered by an external AC to DC power adapter, or through the 5VDC chassis connector. Standalone modules can also be powered by attaching an external DC power supply (18-60VDC). When used in the 14-Module power-redundant Powered Chassis with any combination of AC and DC power supplies, the installed modules are powered via the 5VDC chassis connector.
The wide variety of FlexPoint mounting and power options provide flexible upgrade paths as network requirements change and grow.
FlexPoint unmanaged media converters are easy to use and provide dependable fiber connectivity in Enterprise and Government networks around the world.
Description
10/100 UTP to Fast Ethernet Fiber Media Converter- The FlexPoint 10/100 is a 10BASE-T or 100BASE-TX to 100BASE-FX fiber media converter
- The UTP port supports auto or manual negotiation
- Extends network distances up to 120km
- Supports most network interfaces with a wide variety of cable and connector types
- Labeled status LEDs and switches for quick and easy installation
- Features a crossover switch for connection to hubs, switches or workstations
- Wall-mount or rack-mount on a 5-Module shelf or in a 14-Module power-redundant FlexPoint Powered Chassis
- Completely software independent with no installation of drivers required
- Standard (0 to +50oC), wide (-40° to +60oC) and extended (-40oC to +75oC) temperature ranges
- Peace-of-mind reliability backed by a lifetime warranty and free 24/7 technical support
The FlexPoint 10/100 is a modular 10BASE-T or 100BASE-TX UTP to 100BASE-FX fiber media converter that provides reliable and cost-effective network connectivity and fiber extension.
The FlexPoint 10/100 features a 10/100 auto-sensing UTP port that adjusts to the highest level of performance supported by the attached device. An override switch provides manual control over the 10/100 operation of the UTP port and the Half/Full- Duplex operation of both the fiber and UTP ports.
Using its store-and-forward technology with 1-Mbyte buffer memory, the FlexPoint 10/100 checks all packets and discards illegal or corrupted packets providing fragment-free packet forwarding.
It features a crossover switch that facilitates connectivity to network equipment such as hubs, switches and workstations.
The fiber port operates at 1310nm or 1550nm and features SC, ST, LC or MT-RJ connectors. Multimode fiber models support distances up to 5km, and single-mode fiber models support distances up to 120km.
Manual switch settings and LED indicators with on-the-label descriptions enable easy configuration to legacy devices or specific network requirements. The LEDs report the availability of power, port activity and link status, speed and duplex modes.
FlexPoint modules can be mounted utilizing optional wallmounting hardware or with DIN-rail mounting brackets. They can also be rack-mounted in a 5-Module shelf or in a high-density 14-Module, power-redundant Powered Chassis.
FlexPoint modules installed in the 5-Module shelf or used as standalone devices can be powered by an external AC to DC power adapter, or through the 5VDC chassis connector. Standalone modules can also be powered by attaching an external DC power supply (18-60VDC). When used in the 14-Module power-redundant Powered Chassis with any combination of AC and DC power supplies, the installed modules are powered via the 5VDC chassis connector.
The wide variety of FlexPoint mounting and power options provide flexible upgrade paths as network requirements change and grow.
FlexPoint unmanaged media converters are easy to use and provide dependable fiber connectivity in Enterprise and Government networks around the world.
Specifications
| Network | |
|---|---|
| Cabling technology | 10BASE-T, 100BASE-TX, 100BASE-FX |
| Networking standards | IEEE 802.3 |
| Duplex system | Full, Half |
| Maximum data transfer rate | 100 Mbit/s |
| Fiber optic connector | SC |
| Performance | |
| Wavelength | 1310 nm |
| Maximum transfer distance | 1181102.4" (30000 m) |
| Fiber mode structure | Single-mode |
| Fiber cable diameters supported (core/cladding) | 9/125 µm |
| Mean time between failures (MTBF) | 1100000 h |
| Features | |
| LED indicators | Yes |
| Internal | No |
| Ports & interfaces | |
| Connectivity technology | Wired |
| Ethernet LAN (RJ-45) ports | 1 |
| Fiber optic connector | SC |
| Power | |
| Input current | 1.0 A |
| External power adapter | No |
| Weight & dimensions | |
| Weight | 6 oz (170.1 g) |
| Dimensions (WxDxH) | 3 x 4 x 1" (76.2 x 101.6 x 25.4 mm) |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage temperature (T-T) | -40 - 80 °C |
| Operating relative humidity (H-H) | 5 - 95% |
| Operating altitude | -3937 - 157480.3" (-100 - 4000 m) |
| Technical details | |
| Wavelength | 1310 nm |
| Maximum transfer distance | 1181102.4" (30000 m) |
| Fiber mode structure | Single-mode |
| Fiber cable diameters supported (core/cladding) | 9/125 µm |
| Internal | No |
| Indication | |
| LED indicators | Yes |
| Design | |
| LED indicators | Yes |
| Certification | UL, CE, FCC Class A |
| Internal | No |
| Endurance | |
| Mean time between failures (MTBF) | 1100000 h |
| Certificates | |
| Certification | UL, CE, FCC Class A |
| Other features | |
| Transmit power range | -15 - -8 dBmW |
| Receive power | -31 - -8 dBmW |
| Cabling technology | 10BASE-T, 100BASE-TX, 100BASE-FX |
| Full duplex | Yes |
| Dimensions (WxDxH) | 3 x 4 x 1" (76.2 x 101.6 x 25.4 mm) |
Refund Policy
Common Return Questions
What items are returnable?
Within 14 days of receipt of your shipment
In original condition
Unwashed and Unworn
In the original packaging
What items are non-refundable?
Free gifts or promotional items
Are there any charges for return?
There is no charges for return
Original shipping charges is non-refundable
You are responsible for return shipping charges
How do I return?
Enter your order number and email address in the fields above and click Start a Return
Follow the screen instructions and select the items you want to return
You will get a confirmation email with shipping guidelines
How soon will I get my refund?
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied original method of payment, within 10 business days.
Still have questions? Email us at sales@stockyfy.com with your full name, order number and we will get back to you shortly.