1350 W, APFC, 24 Pin, 2x ATX 8 pin/4+4 Pin, 7x PCI-E, 12x SATA, 4x Peripheral, 140 mm, 16-8A, 50/60Hz, 100-240V, 150 x 86 x 160 mm, Black
Description
Designed with a native PCIe 12+4pin connector, the Toughpower GF3 series is compatible with Intel ‘s ATX 3.0 specification and is built for next-gen PCIe 5.0 graphics cards.
The wattage marked on 12VHPWR’s connector is the recommended wattage. (Ref. Intel design guideline) The native 16 PIN (12VHPWR) PCIe connector of GF3 1350W can deliver up to 600W for PCIe 5.0 graphics cards.
Note: Recommended wattage is an estimation of system power demand. Actual power demands may vary based on specific components, usage, and many other factors.
Toughpower GF3 1350W Gold - TT Premium EditionPCIe Gen 5.0 Ready! Designed with a native PCIe 12+4pin modular connector, the Toughpower GF3 series is built for the next-gen PCIe 5.0 graphics cards and is compatible with Intel ATX 3.0 specifications. The fully modular Toughpower GF3 series comes in 1650W, 1350W, 1200W, 1000W, 850W and 750W and is built to deliver 80 PLUS Gold efficiency. Aimed at providing the best performance, the Toughpower GF3 1350W includes all the critical features such as < 30mV low ripple noise design, extremely strict voltage regulation < ±3%, hold up time> 17 milliseconds, and comes with 100% high quality Japanese capacitors and other premium components to help deliver continuous and stable power.
Fully Compatible With Intel PSDG ATX 3.0 SpecificationsToughpower GF3 series is fully compatible with Intel ATX 3.0 Specifications which supports up to 200% power excursion, reaches 70% low load efficiency and complies with required power supply timing standards. The GF3 series can sustain up to 3x GPU power excursion and 2x total power excursion.
Made to Comply with the Latest Graphics CardsAs the power consumption of graphics cards has increased, so has their demand for power. The GF3 series is designed to support NVIDIA and AMD graphics cards, ready to supply the graphics card according to their different ways of connections.
PCIe Gen 5.0 ReadyToughpower GF3 1350W Gold comes with a 16pin connector to offer powerful and stable performance allowing the PSU to run next-generation GPUs naturally.
Please follow the recommended power requirements from the GPU manufactures before using the 12VHPWR cable.
Ultra Quiet Smart Zero FanDesigned with our Smart Zero Fan, the fan will not spin until the load exceeds 30% of the power supply, minimizing the fan noise.
＜30mV Low Ripple Noise DesignTop-end build quality with low ripple noise. All ripples are lower than 30mV on +12V, +5V or +3.3V from 0% to 100% load to ensure a stable operation and allows your performance-critical components to function reliably for longer.
Extremely Strict Voltage Regulation ＜±3%The voltage regulation, more strict than Intel’s standard +5%,-7% for major rails and ±10% for -12V, is set to no more than ±3% for +12V and +5V, providing steady clean power through exceptional voltage stability.
Fully Modular Low-Profile Flat CableOffers cable selection for users while powering the system at an advantageous voltage. Low-profile flat black cable makes cable management easier, reduces clutter and increases airflow inside the chassis.
100% High Quality Japanese 105°C/221°F CapacitorsProviding great durability as well as offering the highest stability, while remaining reliable.
High Amperage Single +12V Rail & High-Class TechnologiesPowerful single +12V rail can properly deliver the power you need for the best compatibility. The use of LLC and DC to DC circuit design provides very stable operation and enhanced voltage regulation.
140mm Hydraulic Bearing FanFeaturing a 140mm hydraulic bearing fan to guarantee superior cooling performance.
80 PLUS Gold Certified and Intel C6/C7 States ReadyTough power GF3 series saves energy through its high energy efficiency up to 90% and is certified to 80 PLUS® Gold. The series has been optimized to work with all generations of Intel’s processors to achieve maximum energy saving.
CYBENETICS - EFFICIENCY LEVEL CERTIFICATION – PLATINUMToughpower GF3 1350W is certified to CYBENETICS PLATINUM in 115V and 230V input in terms of efficiency level. The overall efficiency rating is defined as ≥89% to ＜91% of 115V input and 230V input. There are six ETA certifications, covering an efficiency range from 82%. Besides the overall efficiency of a PSU, ETA also takes into account its overall Power Factor readings along with the efficiency of the 5VSB rail and the power that the unit consumes in standby (also called phantom power).
CYBENETICS – NOISE LEVEL CERTIFICATION – STANDARDToughpower GF3 1350W is certified to CYBENETICS STANDARD in terms of the noise level. There are seven noise level certifications, covering from dead silent PSUs (＜15db[A]) to quiet noisy ones(>40 db[A]). We use a solid methodology and states of the art equipment to measure the noise that a PSU outputs throughout its entire operation range, from almost zero noise output to full load.
Specifications
| Cooling |
|---|
| Fan diameter |
5.51" (14 cm) |
| Number of fans |
1 fan(s) |
| Cooling type |
Active |
| Performance |
|---|
| On/off switch |
Yes |
| Power supply unit (PSU) form factor |
ATX |
| 80 PLUS certification |
80 PLUS Gold |
| Purpose |
PC |
| ATX version |
3.0 |
| Safety |
CE/UKCA/cTUVus/TÜV/FCC/IC/BSMI/EAC/CB/S-Mark/BIS/KCC |
| Mean time between failures (MTBF) |
100000 h |
| Bearing technology |
Hydraulic |
| Design |
|---|
| 80 PLUS certification |
80 PLUS Gold |
| Safety |
CE/UKCA/cTUVus/TÜV/FCC/IC/BSMI/EAC/CB/S-Mark/BIS/KCC |
| Product colour |
Black |
| Fan diameter |
5.51" (14 cm) |
| On/off switch |
Yes |
| Number of fans |
1 fan(s) |
| Illumination |
No |
| Cooling type |
Active |
| On/off fan switch |
Yes |
| Power |
|---|
| Total power |
1350 W |
| Power Good signal delay range |
100 - 250 ms |
| Peak power |
1350 W |
| AC input voltage |
100 - 240 V |
| AC input frequency |
50/60 Hz |
| Input current |
16 - 8 A |
| Power Factor Correction (PFC) type |
Active |
| Combined power (+3.3V) |
120 W |
| Combined power (+12V) |
1350 W |
| Combined power (+5V) |
120 W |
| Combined power (-12V) |
6 W |
| Combined power (+5Vsb) |
15 W |
| Max output current (+3.3V) |
24 A |
| Max output current (+12V) |
112.5 A |
| Max output current (+5V) |
24 A |
| Max output current (-12V) |
0.5 A |
| Max output current (+5Vsb) |
3 A |
| Power protection features |
Over current, Over power, Over voltage, Short circuit, Under voltage |
| Hold time |
17 ms |
| Efficiency |
90% |
| Number of +12V rail(s) |
1 |
| Ports & interfaces |
|---|
| Motherboard power cable length |
23.6" (60 cm) |
| SATA power cable length |
150,500,800 mm |
| Peripheral (Molex) power cable length |
150,500,800,950 mm |
| CPU power cable length |
27.6" (70 cm) |
| Floppy disk drive cable length |
5.91" (15 cm) |
| Motherboard power connector |
24-pin ATX |
| Number of SATA power connectors |
12 |
| Peripheral (Molex) power connectors (4-pin) |
4 |
| PCI Express power connectors (6+2 pin) |
6 |
| CPU power connector (4+4 pin) |
Yes |
| Floppy drive power connector |
1 |
| Floppy disk drive connector |
Yes |
| Cabling type |
Fully-Modular |
| PCI Express power connectors (12+4 pin) |
1 |
| PCI Express power connectors (12+4 pin) cable length |
500 mm |
| Operational conditions |
|---|
| Operating temperature (T-T) |
0 - 50 °C |
| Storage temperature (T-T) |
-40 - 70 °C |
| Operating relative humidity (H-H) |
20 - 90% |
| Storage relative humidity (H-H) |
20 - 95% |
| Weight & dimensions |
|---|
| Width |
5.91" (150 mm) |
| Depth |
6.3" (160 mm) |
| Height |
3.39" (86 mm) |
| Weight |
4.03 lbs (1.83 kg) |
| Packaging data |
|---|
| Package type |
Box |
| Certificates |
|---|
| 80 PLUS certification |
80 PLUS Gold |
| Safety |
CE/UKCA/cTUVus/TÜV/FCC/IC/BSMI/EAC/CB/S-Mark/BIS/KCC |
