10Gb/s, 850nm, Multimode, Datacom, SFP+
Description
Finisar’s FTLX8574D3BCL 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431 1 , SFF-8432 2 , IEEE 802.3-2012 10GBASE-SR/SW 3 and 10G Fibre Channel 1200-Mx-SN-I 4. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472 5 . The FTLX8574D3BCL is a “limiting module”, i.e., it employs a limiting receiver.
Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per the RoHS Directive 2011/65/EU 6 .
Specifications
| Network |
| SFP transceiver type |
Fiber optic |
| Interface type |
SFP+ |
| Maximum data transfer rate |
10500 Mbit/s |
| Fiber optic connector |
LC |
| Fiber ports quantity |
1 |
| Performance |
| Product colour |
Gray |
| Hot-Plug support |
Yes |
| SFP transceiver type |
Fiber optic |
| Interface type |
SFP+ |
| Maximum data transfer rate |
10500 Mbit/s |
| Fiber optic connector |
LC |
| Wavelength |
850 nm |
| Fiber ports quantity |
1 |
| Duplex system |
Full, Half |
| Multi-mode fiber (MMF) supported |
Yes |
| SFP transceiver standard |
SR, SW, SX |
| Features |
| Product colour |
Gray |
| Hot-Plug support |
Yes |
| Certification |
EN (IEC) 60950 |
| Power |
| Maximum voltage |
3.46 V |
| Maximum current |
0.25 A |
| Input voltage |
3.3 V |
| Operational conditions |
| Operating temperature (T-T) |
-5 - 70 °C |
| Storage temperature (T-T) |
-40 - 85 °C |
| Operating relative humidity (H-H) |
0 - 85% |
| Weight & dimensions |
| Width |
0.583" (14.8 mm) |
| Depth |
2.22" (56.5 mm) |
| Height |
0.467" (11.8 mm) |
| Technical details |
| Compliance certificates |
RoHS |
| Certificates |
| Certification |
EN (IEC) 60950 |
| Logistics data |
| Quantity per pack |
1 pc(s) |