Plantronics APC-43 38350-13 Electronic Hook Switch Adapter
Plantronics APC-43 38350-13 Electronic Hook Switches (EHS) communicate electronically with your phone giving your wireless headset answer/end and ring alerts remotely. The use of an EHS cable eliminates the need for an HL10 handset lifter.
Plantronics has several EHS adapters, each being unique to a specific telephone and wireless product. We strongly suggest confirming compatibility with us before purchasing.
This is the Plantronics APC-43(43 38350-13 ) EHS (replaces APC-42) Electronic Hookswitch (EHS) cable for Cisco IP Phones. The Plantronics APC-43 (43 38350-13 ) is compatible with these Plantronics wireless headset models:
Plantronics CS540, CS510, CS520 Plantronics Savi W740, Plantronics Savi W710 , Plantronics Savi W720 , Plantronics Savi W730 , Plantronics Savi W745, Plantronics Legend CS
Plantronics APC-43 (43 38350-13 ) is exactly the same as previous APC-42. except it has a few minor bug fixes and additional compatibility with more Cisco phones. old part# 38350-01, 38350-11, and 38350-12
- Connects your Cisco IP phone to Plantronics CS500, Savi 700, and Savi Office series wireless headsets
- Provides remote one-touch answer/end call control for your wireless headset
- Eliminates the need for an HL-10 handset lifter
- Includes connector for existing online indicator (OLI) lights
Plantronics APC-43 38350-13 Electronic hook switch cable eliminates the need for a handset lifter and lets you quickly answer and end calls. Easy-to-use design makes installing this cable simple to get you quickly set up and going. Cable works with Cisco desk phones (sold separately) and may work with additional manufacturers.
Product information
|
Manufacturer
|
Plantronics
|
|
Color
|
Black
|
|
Category
|
Audio & Home Theatre
|
|
Sub-Category
|
Headphone/Headset Accessories
|
|
Product Dimensions
|
5.1 x 3.5 x 1.9 inches
|
|
Item Weight
|
4 ounces
|
|
Shipping Weight
|
4 ounces
|
|
Item model number
|
38350-13
|
Compatibility
Compatibility of plantronics Plantronics APC-43 38350-13 is as under
CS500 Series: CS510, CS520, CS530, CS540, and all -XD variants
Savi Series: W710, W720, W730, W730, W740, W745 and all -M variants
Savi Series: W8210, W8220 and all -M variants
Compatible with the following phones:
Cisco 6945, 7821, 7841, 7861, 7942G, 7945G, 7962G, 7965G, 7975G, 8841, 8845, 8851, 8861, 8865
Cisco Electronic Hookswitch Setup:
Software Requirements:
The Cisco server must be running Cisco CallManager System Version 4.1(3)SR5x or higher.
Verify by logging onto the Callmanager with a browser. Press the detail button on the main page to display the SW version.
The Cisco phone must be running firmware 8.3(3)x or higher.
Press the settings button on the phone (Checkbox icon). Select “Model information”. The firmware revision is listed under “Load File”
Phone verification
The phone must be set for “Wireless Headset Hookswitch Control” = Enabled
Press the settings button on the phone (Checkbox Icon). Select “Device Configuration” >> Select “Media Configuration”
If “Wireless Headset Hookswitch Control” is ” Disabled”, follow the instructions below.
Enabling Wireless Headset Hookswitch Control
Access the server administrator with a browser. Select Device>Phone through the drop down menus.
Click “Find” with no selection criteria to obtail a list of all phones
Open the desired phone. Scroll down to “Wireless Headset Hookswitch Control” Set to “Enabled”
Click “Apply”. Wait for the dialog box to appear, then reset the phone by clicking the reset button.
Expansion Modules
If the phone is equipped with a model 7914/7915/7916 expansion module:
The Expansion module will be plugged into the telephone AUX connector
Connect the APC-4 (APC-43) control connection into the expansion module
Use a 40287-05 adapter to extend the APC-4 (APC-43)(43 38350-13) audio input to reach the headset jack on the phone
Cisco phone setup:
The phone must be set for “Wireless Headset Hookswitch Control” = Enabled
Press the settings button on the phone (Checkbox Icon). Select “Device Configuration” >> Select “Media Configuration”
If “Wireless Headset Hookswitch Control” is “Disabled”, follow the instructions below
Enabling Cisco wireless headset EHS hookswitch control:
Access the Cisco server administrator with a browser. Select Device>Phone through the drop down menus. Click "Find" with no selection criteria to obtain a list of all phones
Open the desired phone. Scroll down to "Wireless Headset Hookswitch Control" Set to "Enabled" Click "Apply". Wait for the dialog box to appear, then reset the phone by clicking the reset butto
