APC SMX3000LVNC uninterruptible power supply (UPS) 3 kVA 2700 W 7 AC outlet(s)

Smart-UPS X 3000VA Rack/Tower LCD 100-127V w/ Network Card

Description

Intuitive LCD interface

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

High frequency design

Reduces or eliminates bulky transformers resulting in lighter units for ease of handling.

Auto recognition of external batteries

UPS recognizes when external battery packs are attached and automatically adjusts runtime.

Predictive replace battery date

Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Energy meter

Provides actual kilowatt hours of usage for energy conscious users.

Outlet group control

Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).

Load shedding

Turn off select outlet groups in a pre-determined sequence to shed less critical equipment and conserve runtime (UPSs with switched outlet groups).

Pure sine wave output on battery

Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Multiple switched outlet groups

Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.

Wide input voltage range

Designed for harsh electrical environments to save battery life.

StruxureWare Central compatible

Enables centralized management via StruxureWare Central.

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

High online efficiency

Reduces utlility costs, generates less heat.

LED Indicators

Provide easy-to-read status of the unit and utility power conditions.

Overload protection

Safeguards unit from damage by automatically turning it off in the event of a short circuit or overload.

SmartSlot

Customize UPS capabilities with management cards.

Cold-start capable

Provides temporary battery power when the utility power is out.

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Adjustable voltage-transfer points

Maximizes useful battery life by widening the input voltage window or tightening the output voltage
regulation.

Adjustable voltage sensitivity

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Audible alarms

Provides notification of changing utility power and UPS power conditions

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

USB connectivity

Provides management of the UPS via a USB port (not available on all models).

Serial Connectivity

Provides management of the UPS via a serial port.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Scalable runtime

Allows additional run time to be quickly added as needed.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Rack/Tower convertible

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Network manageable

Provides remote power management of the UPS over the network.

Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Predicitive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.

Sequenced network shutdown and reboot

Customize network shutdown and reboot sequence of connected servers and UPSs.

Specifications

Power
Output power	2700 W
Input operation voltage (min)	70 V
Input operation voltage (max)	153 V
Surge energy rating	540 J
Efficiency	97.5%
Emergency Power Off (EPO)	Yes
Output voltage Total Harmonic Distortion (THD)	5%
Output power capacity	3 kVA
Input frequency	50/60 Hz
Ports & interfaces
Cable length	96.1" (2.44 m)
AC outlets quantity	7 AC outlet(s)
AC outlet types	NEMA 5–15R, NEMA 5–20R, NEMA L5-30R
Power plug	NEMA 5-30P
USB 2.0 ports quantity	1
Performance
Waveform	Sine
LED indicators	Yes
Noise level	55 dB
Audible alarm(s)	Yes
Features
Waveform	Sine
Output power	2700 W
Input operation voltage (min)	70 V
Input operation voltage (max)	153 V
Surge energy rating	540 J
Efficiency	97.5%
Emergency Power Off (EPO)	Yes
Output voltage Total Harmonic Distortion (THD)	5%
Noise level	55 dB
Audible alarm(s)	Yes
Output power capacity	3 kVA
Input frequency	50/60 Hz
Battery
Number of batteries supported	1
Battery technology	Sealed Lead Acid (VRLA)
Battery recharge time	3 h
Design
Rack capacity	2U
Form factor	Rackmount/Tower
LED indicators	Yes
Product colour	Black
Certification	BSMI, CSA, EN 50091-2, EN 55022 Class A, FCC Part 15 Class A, NOM, TUV, UL 1778, VCCI Class A REACH
Cable length	96.1" (2.44 m)
Display type	LED
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 45 °C
Operating relative humidity (H-H)	0 - 95%
Storage relative humidity (H-H)	0 - 95%
Operating altitude	0 - 118110.2" (0 - 3000 m)
Non-operating altitude	0 - 590551.2" (0 - 15000 m)
Technical details
Compliance certificates	RoHS
Packaging data
Package dimensions (WxDxH)	23.1 x 24.9 x 13" (586 x 633 x 330 mm)
Package weight	105.2 lbs (47.7 kg)
Certificates
Certification	BSMI, CSA, EN 50091-2, EN 55022 Class A, FCC Part 15 Class A, NOM, TUV, UL 1778, VCCI Class A REACH
Compliance certificates	RoHS
Weight & dimensions
Weight	85.1 lbs (38.6 kg)
Width	7.01" (178 mm)
Package weight	105.2 lbs (47.7 kg)
Height	17" (432 mm)
Depth	19" (483 mm)
Other features
Package dimensions (WxDxH)	23.1 x 24.9 x 13" (586 x 633 x 330 mm)