16 GB, DDR4, 3200MT/s, Non-ECC, CL22, 1.2V, Unbuffered, SODIMM
Key Features
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for
- data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Single-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8
- via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.18” (30.00mm)
- RoHS Compliant and Halogen-Free
Description
ValueRAM's KVR32S22S8/16 is a 2G x 64-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers.
Specifications
| Technical details |
| Country of origin |
Taiwan |
| Memory |
| Buffered memory type |
Unregistered (unbuffered) |
| Memory layout (modules x size) |
1 x 16 GB |
| Internal memory |
16 GB |
| Component for |
Laptop |
| Memory form factor |
260-pin SO-DIMM |
| CAS latency |
22 |
| ECC |
No |
| Internal memory type |
DDR4 |
| Features |
| Buffered memory type |
Unregistered (unbuffered) |
| Memory layout (modules x size) |
1 x 16 GB |
| Internal memory |
16 GB |
| Component for |
Laptop |
| Memory form factor |
260-pin SO-DIMM |
| CAS latency |
22 |
| Country of origin |
Taiwan |
| ECC |
No |
| Internal memory type |
DDR4 |
| Harmonized System (HS) code |
84733020 |
| Memory data transfer rate |
3200 MT/s |
| Weight & dimensions |
| Width |
2.74" (69.6 mm) |
| Height |
1.18" (30 mm) |
| Logistics data |
| Harmonized System (HS) code |
84733020 |
| Other features |
| Country of origin |
Taiwan |
| Harmonized System (HS) code |
84733020 |